top of page

PFP 1310/1550 nm Bend Insensitive Medium-NA Select Cutoff SM Fiber

SKU 1310M-HP
Price

$3.64

Excluding Sales Tax

 

PFP's 1310/1550 nm high-performance select cut-off single-mode fibers are optimized for use by component manufacturers in the telecommunications wavelengths. These application-specific fibers were developed for small form factor components. PFP's fibers offer exceptional uniformity and core/clad concentricity, very tight second mode cut-off tolerances, and tight bend radius specifications for applications in miniaturized fiber optic packages. These high-performance specifications result in superior strength, increased component reliability, improved production yields and reduced component manufacturer costs.
Applications
  • Small form factor components
  • Couplers
  • Optical switches
Features & Benefits
  • Exceptional uniformity and core/clad concentricity - low, consistent splice loss  
  • Tight mechanical and optical tolerances - high component manufacturing yields  
  • Higher proof test levels and 80 ?m diameter - critical for long-term reliability in tight bend applications

Optical Specifications

Operating Wavelength1310-1620 nm
Mode Field Diameter6.7 &*177; 0.5 µm @ 1310 nm
Second Mode Cut-Off1250 &*177; 50 nm
Attenuation&*8804; 0.75 dB/km @ 1310 nm
&*8804; 0.5 dB/km @ 1550 nm
Core Numerical Aperture (nominal)0.16
Bend Radius for 0.05 dB per 100 TurnsMuch less than LTBR @ 1310 nm
12 mm @ 1550 nm

Geometrical & Mechanical Specifications

Clad Diameter125.0 &*177; 1.0 µm
Coating Diameter245 &*177; 15 µm
Core-Clad Concentricity< 0.5 µm
Coating/Clad Offset&*8804; 5 µm
Coating MaterialUV Cured, Dual Acrylate
Operating Temperature-55 to +85 ∞C
Short-Term Bend Radius&*8805; 6 mm
Long-Term Bend Radius&*8805; 13 mm
Proof Test Level&*8805; 200 kpsi (1.4 GN/m≤)

 

 

Note: A re-spooling & cut fee of $30.00 is included for all lengths under the 100 meter spool size. To order an entire 100 meter spool please contact our Customer Service Department.

Fiber Length

bottom of page