Product Overview
PFP's 1550B-HP high-performance select cutoff bend insensitive single-mode fiber is optimized for use in small form factor active and passive components requiring tight bend radii. With a bend loss considerably lower than SMF-28?, 1550B-HP is ideal for the video leg in FTTH CWDM and applications such as smaller form factor C and Lband components and low NA planar waveguides.
|
|
Optical Specifications |
|
| Operating Wavelength | 1460-1620 nm |
| Mode Field Diameter | 9.5 &*177; 0.5 µm @ 1550 nm |
| Second Mode Cut-Off | 1400 &*177; 50 nm |
| Attenuation | &*8804; 0.5 dB/km @ 1550 nm |
| Core Numerical Aperture (nominal) | 0.13 |
| Bend Loss for 100 turns @ LTBR | 0.3 dB @ 1550 nm |
| Bend Radius for 0.05 dB per 100 Turns | 15 mm @ 1550 nm (nominal) |
Geometrical & Mechanical Specifications |
|
| Clad Diameter | 125.0 &*177; 1.0 µm |
| Coating Diameter | 245 &*177; 15 µm |
| Core-Clad Concentricity | < 0.5 µm |
| Coating/Clad Offset | &*8804; 5 µm |
| Coating Material | UV Cured, Dual Acrylate |
| Operating Temperature | -55 to +85 ∞C |
| Short-Term Bend Radius | &*8805; 6 mm |
| Long-Term Bend Radius | &*8805; 13 mm |
| Proof Test Level | &*8805; 200 kpsi (1.4 GN/m≤) |
Note: A re-spooling & cut fee of $30.00 is included for all lengths under the 100 meter spool size. To order an entire 100 meter spool please contact our Customer Service Department.