PFP Photosensitive Select Cut-Off Single-Mode Fiber
PFP PS1060 photosensitive fiber is designed for use in writing fiber Bragg gratings for pump stabilizers or diode output wavelengths in the 980 to 1060 nm range. PS1060 is also used in coupler applications. This photosensitive fiber provides a cost-savings for grating-writing because customers can write highly repeatable, quality gratings in a short time.
| Applications |
|---|
- Pump stabilizers
- Diode pigtailing
- Couplers
| | | Features & Benefits |
|---|
- High photosensitivity - Enables low cost, high yield grating fabrication
- Mode matched to standard transmission fiber - Low splice loss
| |
Optical Specifications |
| Operating Wavelength | 980-1060 nm |
| Mode Field Diameter | 6.2 ± 0.8 µm @ 1060 nm |
| Second Mode Cut-Off | 920 ± 50 nm |
| Attenuation | &*8805; 20 dB/km @ 1060 nm |
| Core Numerical Aperture (nominal) | 0.13 |
Geometrical & Mechanical Specifications |
| Clad Diameter | 125.0 ± 1.5 µm |
| Coating Diameter | 245 ± 15 µm |
| Core-Clad Concentricity | < 0.5 µm |
| Coating/Clad Offset | &*8805; 5 µm |
| Core Composition | Photosensitive |
| Coating Material | UV Cured, Dual Acrylate |
| Operating Temperature | -55 to +85 ∞C |
| Short-Term Bend Radius | &*8805; 12 mm |
| Long-Term Bend Radius | &*8805; 25 mm |
| Proof Test Level | &*8805; 100 kpsi (0.7 GN/m≤) |
Note: A re-spooling & cut fee of $30.00 is included for all lengths under the 100 meter spool size. To order an entire 100 meter spool please contact our Customer Service Department.
